Published Resources Details
Journal Article
- Title
- A multi-range push-pull thermionic voltmeter
- In
- Journal of the Institution of Engineers, Australia
- Imprint
- vol. 6, no. 11, Nov 1934, pp. 444-445
- Description
This paper, No.496, originated in the Sydney Division of The Institution.
The author, Geoffrey Builder PhD FInstP, is Research Physicist, Radio Research Board of the Council for Scientific and Industrial Research of the Commonwealth of Australia.- Abstract
The paper describes a useful and robust laboratory voltmeter, with a symmetrical input circuit. A 5 mA meter is used to obtain ranges of 0-5, 0-15, 0-50, 0-150 and 0-500 volts, the scale being approximately linear. Range change switching does not require any readjustment, and the calibration is independent of reasonable variation of supply voltages, which may be taken from a rectifier pack, with an alternating current for the filament of the 55 or 85 type valve. Damage to the instrument, due to application of a higher voltage than that for which the range is set, is practically impossible since under no conditions is the total current through the 5 mA meter more than about 7mA.
